BellaSeno, an ISO 13485-certified medtech company developing resorbable scaffolds using additive manufacturing technologies, has presented data on the design and manufacturing of customised, 3D-printed bone scaffolds at the recent German Congress of Orthopaedics and Traumatology (DKOU).
Phonlamai Photo Shutterstock
1666297543
3d rendering 3d printer print prosthetic spine
BellaSeno presented an MDR-compliant (Medical Device Regulation) and ISO 13485 audited workflow for the design and manufacturing of 3D-printed, resorbable, custom-made polycaprolactone scaffolds for the treatment of segmental bone defects in conjunction with an autologous bone graft (RIA Reamer Irrigator Aspirator or cancellous bone).
The presentation titled "Semi-automated workflow for the design and fabrication of 3D-printed patient-specific resorbable scaffolds for the treatment of large segmental bone defects while complying with MDR regulations" outlined the potential of BellaSeno's novel resorbable scaffolds for curing large segmental bone defects (> 5cm size). In these large injuries, biological reconstruction using the diamond concept is preferred. It provides for the application of osteogenic cells in conjunction with a scaffold. The scaffold is needed to hold the autologous bone graft in position for optimal vascularisation and bone healing. Scaffolds made by additive manufacturing from bioresorbable polymers represents a highly attractive opportunity to produce such patient-specific open-pore scaffolds.
Following specialist indication, digital segmentation of the CT is performed with 3D reconstruction. The exact defect is defined and, following the treating surgeon’s direction, BellaSeno creates an anatomically oriented design to fill the defect. This is followed by adjustment of various parameters to customise the fit and mechanical performance of the scaffold. Depending on whether the scaffold is to be used in conjunction with plate or nailless osteosynthesis, additional features are integrated. Fused deposition modeling (FDM) will be used as a 3D printing technique as it offers clear biomechanical and economic advantages over other techniques (e.g., Selective Laser Sintering SLS). A prototype is sent to the practitioner for design freeze and is then biomechanically tested before manufacturing the scaffold under cleanroom conditions with subsequent post-processing and sterilisation.
"This specific workflow allows a very time- and cost-effective manufacturing process for patient-specific scaffolds while complying with highest regulatory standards," said Dr. med. Tobias Grossner, chief medical officer of BellaSeno. "Depending on the desired properties of the scaffolds, the products can absorb static non-deformable axial forces of up to 4,000 N or shorten by up to 1cm under a load of up to 1,000N in a controlled manner without breaking. This results in a new generation of high-performance bone scaffolds which are well suited for the biological reconstruction of large bone defects."
BellaSeno's ISO 13485 certified manufacturing platform is designed to meet the requirements of medical scaffolds ranging from soft tissue to bone and enables the production of both custom-made and off-the-shelf sterile medical implants.